Phone
Send Email
whatsapp
Facebook
Youtube
01
Minimalist and atmospheric bamboo charcoal wood veneer background wall
The size of the wood veneer?
Product Parameter
| First, wood veneer panel (substrate) there are several main materials? Advantages and disadvantages of materials | |
| Bamboo and wood fiber (yellow substrate), carbon crystal co-extruded (black substrate) | |
| Bamboo wood fiberboard: mostly new materials, environmental protection, relative to the carbon crystal board is soft and easy to bend to do modeling. | |
| Carbon crystal co-extruded plate: mostly recycled material, because there is a white co-extruded layer on both sides of the higher hardness is not easy to deformation. | |
| Base plate composition: PVC powder + calcium powder |
| How to calculate the weight of the plate | |
| For example, a plate with a width of 1.22 meters and a length of 2.44 meters and a thickness of 8mm and a density of 0.65 is used | |
| 1.22*2.44 = 2.9768*8 = 23.8144*0.65 = 15.47936kg | |
| Take a plate 1.22 meters wide and 2.44 meters long with a thickness of 5mm and a density of 0.65 as an example | |
| 1.22*2.44*5*0.65 = 9.6746kg |
| Wood veneer panel (film) is mainly a few materials? | |
| PVC film, PET film | |
| PVC film advantages and disadvantages: the price is cheap, there are thousands of colors to choose from. Scratch-resistant, thin thickness | |
| PET film advantages and disadvantages: expensive, less color. The effect texture is better than PVC, scratch-resistant, thick film |
| Wood veneer panel production technology | |
| PUR Hot glue/cold glue | |
| PUR hot melt adhesive: the sheet and film are heated at the same time to produce a sheet with small taste and high adhesion and long service life. The price is slightly higher | |
| Cold glue: Only the film is heated, the produced sheet has a large odor and a long volatile period, and the adhesion and service life are low. cheap | |
| Note: PET (film) sheet is produced by hot glue. |
| Wood veneer installation method | |
| 5mm plate need to use woodworking board Europine board gypsum board or flame retardant board to level the base before the wall, 8mm plate in the case of high wall flatness can be directly on the wall. | |
| Installation process: Put 995 type neutral glue directly on the wall behind the plate. The splicing between the plate and the plate can be made of I-line or seamless splicing after the plate is slotted, and the installation master can also leave 2mm natural seam on the edge. The yin-yang Angle has corresponding yin-yang Angle lines. | |
| 5mm plates can be molded with a heat gun on the back of the plate or slotted and bent behind the plate, and 8mm plates can only be molded with grooves because of the thickness of the plate. |
| How to reverse the density of the template | |
| Take a sheet with a length of 20cm and a width of 12cm, a thickness of 7.6mm and a weight of 117g as an example | |
| 0.117 kg (0.0076 m members present present 0.12 m members present 0.2 0.64 m material | |
| 117 g 0.76 cm present present 12 cm present 20 cm material of 0.64 | |
| So we know that the density of this plate is about 0.64 | |
| Note: The 700kg/m³ sheet is 0.7 density sheet, and 650kg/m³ is 0.65 density sheet. The weight calculated by all the above formulas is the bare plate, the weight of the finished plate = the weight of the bare plate + the weight of the film |
Advantages of wood finish
Waterproof, moisture-proof, mildew-proof, moth-proof, good strength, high hardness, wear-resistant, non-cracking, small water absorption, aging resistance, corrosion resistance, anti-static and ultraviolet, insulation, heat insulation, high temperature resistance, flame retardant and self-extinguishing.
